Expert Service 24/7 | We Stand By Our Quality

Was My HVAC System Installed Properly?

Feb 15, 2019

I can’t begin to tell you how important it is to ensure your air conditioning and furnace are installed properly. With a properly installed system, you can expect fewer repairs, improved energy efficiency, indoor comfort and fewer repair. Having a qualified contractor install your system is going to give you comfort knowing that you are getting the best bang for your buck.

 

Who is the best HVAC contractor near me?

I understand the need to stay on a budget. When you choose a cheap contractor sometimes they are not as knowledgeable to help you with your installation. We see a lot of contractors that cut corners and leave holes and gaps in systems. Read reviews, ask for referrals and check them out before you buy. It will save you a lot of money on your heating and cooling system.

Why is the Installation Important?

There are many things to consider when you looking at new systems. Top of the mind is efficiency. We always want to make sure the air conditioner is going to be the right size to keep you cool and save you money. The installation is just as important as the system itself. Your house is a certain square foot. When the system has installed any gaps or shortcuts and cost you thousands over the years.

 

Home Comfort: If a furnace is installed that is too small, you are going to be running it all the time and you might not achieve the desired temperature. You will be fighting your comfort all the time. It is going to cost you on the back end and you will be very upset when you receive your bill.

Lifespan: A botched installation of your system means it could runway to high or too low. This can cause many electrical problems over the years. It will then nickel and dime you to death. IF your system has to fight holes in the ductwork or a faulty wiring. Your air conditioner will run all day long that is just not good. Imagine you have to run in 100-degree heat at full pace all day long. You’re going to break down. It is the same for the HVAC systems.

After the installation has them go over their work with a fine tooth comb. You want to make sure that everything is up to par. Things can be easily missed especially if the tech is in a hurry.

 

Contracting Business has a great article on “defining a quality HVAC installation”. They help pin point a lot of things that will help you on this journey. To get deeper detail and knowledge on this check them out.

 

Things to Do When Getting Your HVAC System Installed.

 

It is important that you clean anything away from your system. A Lot of times HVAC technicians have to work with very small areas. Take a few minutes and go in and do some cleaning around the area. On the outside, if you have hoses or cars or anything that could obstruct the installation, it is best to remove them.

 

Make sure that if you are getting an installation done and they are going to require modifying your home. Please check that you do not need a permit or any other information for your homeowner’s association.

 

If you need service today we are here for you click here to call today.